3 Causes Of A Drippy Or Leaking Faucet

One of the most common and annoying plumbing issues that you will come across is a dripping or leaky faucet. There are numerous causes of a drippy faucet and many times, they can be rectified by a simple DIY trick or a quick call to a trusted plumber. Throughout the course of this brief article, you'll learn of just a few of the common causes of a drippy or leaky faucet.

Broken Plumbing

Broken plumbing and cracked pipes can cause your faucets to leak or drip. This occurs due to the fact that broken fitting will cause the water pressure level of your plumbing system to rise and eventually cause water to push upwards through your faucet. Though having broken plumbing or pipes is a rare issue, it is also a serious one. If you have determined that broken plumbing is the cause of your leaky faucet, it is highly recommended that you call on the services of a professional plumber as soon as possible.

O Ring Issues

An O ring is an apparatus that looks like a small ring that is attached to the stem screw that keeps your faucet's handle in working condition. The O ring is a pivotal figure in the construction of your faucet and, as such, it can spring a leak. If your faucet appears to not be dripping, but rather, simply leaking from the area around its handles, then the O ring could very well be the cause of such issues. Over time, this apparatus can become worn, and must be replaced, otherwise a leak will become quite likely. Replacing an O ring is an easy task. It simply involves removing the stem screw, removing the current O ring, placing the new O ring in place, and replacing the stem screw.

Worn Washer

This is another case of a part that can simply become worn out over time due to usage. Whenever your faucet is used, your valve seat presses against the washer. Your faucet's washer becoming worn will cause frequent dripping and, as such, the washer needs to be replaced with some degree of frequency. The valve seat washer is located right above where the spigot of the faucet meets the handle. Simply unscrew the handle to locate the part. It is often recommended that you make use of a rubber washer, which tends to last significantly longer than one of a metal construct.

Contact a plumber like Rooter Pro Plumbing if you have questions about your specific situation.

Share